100% Satisfaction Guarantee

24/7 Service in Dallas


The temperature of DALLAS might concern for you when you are living here. What indoor temperature is optimal for your home in Dallas, Texas? There’s no single solution, as you might have guessed. Your house temperature is better based on your priorities. Do you want to sleep more, increase your productivity, or be more active to lower your bills? You will find the right thermostat setting for your house if you know your priorities.


For better sleep

Set the thermostat about 60-67 degrees Fahrenheit when the ultimate desire is a better sleep in the night. You can invest a little time to discover the optimal temperature, but cooler is typically better. The sleeping temperature of your body is decreasing. You will fall asleep easier with a cool environment that encourages this transition.


However, be mindful that children need warmer temperatures, between 65 and 70 degrees, to sleep healthy and comfortable. Without heating the rest of the building, a personal heater can be used.


For increased productivity

You should try maintaining your house or office below 71 degrees if you have the highest priority of increasing productivity. Studies demonstrate that the optimal temperature varies according to the job you do and what you calculate. The best bet in a productive setting appears to be 71.6 degrees in total.


If everyone can’t settle on the right temperature, try upgrading to a ductless device, which can set various temperatures for different locations.


For reducing the electricity bills

If the key purpose is to decrease your electricity costs annually, then the US Energy Department advises retaining your thermostat in cold months at 68 and in hot months at 78. Even more will be saved if you are lower the temperature by a few degrees while sleeping or going out of the house. For energy conservation, you want to obtain the lowest possible difference between the interior and exterior temperatures.


Air condition maintenance

Adequate air conditioning or heat pump repair system means that the device continues to provide ventilation or heating through winter or summer. Some of the actions you should take are quick and do not include a repair technician. The basic technical skills you are prepared with will save you time and resources in the long term.


Why the air conditioner needs maintenance?

Much like the vehicle needs routine repairs, the conditioners also need regular consideration.  Proactively taking care of your air conditioning system not only increases your unit’s existence, but it also saves you considerable maintenance and upgrades costs. Simply adjusting the air filter in the air conditioner device will increase its performance and improve the air quality of the house.


Some ways in which maintenance can be done

The following are some maintenance ways.


Check the condenser

The condensing machine is normally installed outside your house in a traditional air conditioner where the compressor, fan, and condensation belt are located. This machine rejects the heat in the room while your home is cooled by spraying the fan around the condensing belt. Ensure that the fan and airflow of the condenser are not obstructed. You will typically see dry leaves, plastic bags, and other undesirable materials added to the condenser, especially when they are not used for a long period. Use a brush to draw it away from the spindles if necessary to ensure that the air blows off the condenser.


Clean the evaporator coil

Use a vacuum cleaner or a damp cloth to disinfect the spirals of the indoor evaporator, depending on the level of use, at least once a month or every two weeks. If the evaporator is kept clean, the air conditioner does not lose cooling power due to debris that prevents air from entering the room.


Check the ductwork

Check on the vent to ensure that the ductwork is airtight with a loosed sealing or broken sealing mechanism by operating a central air conditioning system. It helps to guarantee the air conditioner’s quality. If required, delete and replace the filter. Ensure the furniture in the house is not covering the ventilation.


Clean the filters

Most indoor evaporator units have removable filters that trap dust. These filters prevent the evaporator spindle from being blocked. These filters are extracted quickly and washed with water and neutral soap to clean the dust. Before you put the filters back in the machine, clean and dry them. Do not clean the filter by using fuel or chemicals. Clean the filters once a month, at least. Some machines come with a secondary filter system that has electrostatic filters. If they are dusty, change them also.