AC Installation and Replacement in Fairview, TX

Fairview requires a mechanical permit filed by a Town-registered contractor, and offers remote virtual inspections for condenser change-outs. Here’s how a replacement works.

Replacing an AC in Fairview

• Inspection option. Condenser change-outs can qualify for a remote virtual inspection.
• Line set length. Long runs affect equipment choice.
• Refrigerant on the data plate.
• Registered master. Fairview requires a named master license holder on the contractor’s registration.

We cover each of these on the first visit.

What we install in Fairview

• Heat pumps
• Gas furnace plus AC systems
• Ductless mini-splits
• Central AC with matched coils

Still deciding? Read should I repair or replace my air conditioner, heat pump installation and are smart thermostats worth it.

We install and service all major brands, including Carrier, Trane, Lennox, Rheem, American Standard, York, Daikin, Mitsubishi, Fujitsu, Amana, Bryant and Goodman.

Fairview homes and what their age means for your system

Fairview grew mostly in the 2000s, which built about 43% of its homes. The Census puts the median at 2006, and about 66% of homes are detached houses, from large-lot homes to newer neighborhoods.

The Census counts about 4,552 homes in Fairview. Here’s how they break down by decade built:

The house’s age doesn’t tell you the system’s age. The data plate on the outdoor unit does, and it’s the first thing we read.

Many Fairview homes from the 2000s are large, with two or more systems and long attic duct runs, and their original equipment is now reaching the age of the first big repair. On acreage homes, outdoor units may sit far from the house, with long refrigerant lines that make leaks harder to find. We test each system separately and give you a written repair-or-replace comparison when a major part fails. Fairview’s lots also mean outdoor units often sit in open yards exposed to grass clippings, cottonwood and mower debris, so we clean and inspect the coil on every cooling call.

Fairview permits for HVAC work

• Mechanical contractors must register with the Town, naming the master license holder responsible for supervising all installations and repairs. Registration expires with the license, and if that license holder leaves, no further work may be done until a new one is registered.
• Fairview offers remote virtual inspections for eligible HVAC work, including condenser change-outs, mini-split installs, split systems and mechanical ventilation.
• Fairview has adopted the 2024 IMC and IRC. Town Hall: 372 Town Place, 972-562-0522; inspections 972-886-4250.
• The Town of Fairview issues mechanical work on its Mechanical, Electrical, Plumbing and Irrigation permit application, submitted by email to the Town’s permits office.

Dallas Heating and Air Conditioning is registered with the Town of Fairview as a mechanical contractor. For a replacement, we pull the permit and schedule the inspection.

Fairview’s contractor registration names one master license holder responsible for continuous supervision of all work. That’s the person accountable for your installation. If that person changes, the Town says no further work may be done until a new master is registered.

Refrigerant and efficiency rules that affect your decision

R-22. The EPA ended the manufacture of new R-22 equipment in 2010 and the production and import of R-22 itself on January 1, 2020. An R-22 system can keep running, but it can only be recharged with recovered or reclaimed R-22. A large leak on an R-22 unit is often the point where replacement makes more sense than repair.

SEER2. Since January 1, 2023, Department of Energy rules require new split-system central air conditioners installed in the Southeast region, which includes Texas, to meet at least 14.3 SEER2 under 45,000 Btu/h and 13.8 SEER2 at 45,000 Btu/h and up. New split heat pumps nationwide must meet 14.3 SEER2. See SEER vs. SEER2.

New refrigerants. Under the EPA’s AIM Act rules, new home air conditioners and heat pumps are moving to refrigerants with lower global warming potential, such as R-454B and R-32. Read what the R-410A phase-out means.

How a Fairview installation works

1. Home visit. We check the equipment, ducts, electrical, attic access and the refrigerant type on the data plate.
2. Sizing. We size the system for the house, its insulation, windows and ducts, not by copying the old label.
3. Written options. Upfront written pricing for each option before any work starts. Financing available.
4. Permit. We pull the Fairview permit.
5. Installation. Outdoor unit, matched coil or air handler, refrigerant lines, drains, electrical and thermostat as needed.
6. Startup and inspection. We charge and test the system, then the Town inspects it.

When it makes sense to replace

• An R-22 system has a large leak
• The house never gets comfortable even after repairs
• You’re adding or remodeling space and the old system can’t keep up
• Your current system has failed and repair isn’t worth it

Upfront written pricing before any work starts

Every replacement starts with a written proposal. Here’s what goes in it:

• Any duct, attic access or electrical work the Town will check is listed separately.
• Each equipment option is priced on its own.
• Financing available.
• What the written proposal covers: the equipment, matched indoor coil or air handler, refrigerant lines, drain, electrical connections, thermostat, permit and inspection.

Why homeowners call us

• 24/7 service
• Upfront written pricing before any work starts
• Financing available
• Registered with the Town of Fairview as a mechanical contractor
• All major brands, including Carrier, Trane, Lennox, Rheem, American Standard, York, Daikin, Mitsubishi, Fujitsu, Amana, Bryant and Goodman
• NATE-certified technicians

More for Fairview: HVAC service in Fairview, AC repair in Fairview, heating repair in Fairview. See also AC installation and replacement and HVAC maintenance and tune-ups.

Also nearby: AC installation in Allen, AC installation in McKinney, AC installation in Plano.

Call 972-423-0012, open 24 hours.