Grapevine has a specific permit category for a residential A/C change-out, and the contractor must be registered with the City. Here’s how a replacement works in Grapevine.
Replacing an AC in Grapevine
- Older home? Check whether the ducts were designed for central air.
- Refrigerant on the data plate.
- Contractor registration. Grapevine requires it, and registrations run by permitting year.
- Space and access. Closets, attics and shared pads limit what fits.
We cover each of these on the first visit.
What we install in Grapevine
- Gas furnace plus AC systems
- Duct changes where the house needs them
- Central AC change-outs with matched coils
- Heat pumps
Still deciding? Read should I repair or replace my air conditioner, heat pump installation and are smart thermostats worth it.
We install and service all major brands, including Carrier, Trane, Lennox, Rheem, American Standard, York, Daikin, Mitsubishi, Fujitsu, Amana, Bryant and Goodman.
Grapevine homes and what that means for your system
Grapevine has everything from historic homes near Main Street to newer houses, townhomes and apartments. Because of that range, we don’t assume anything about a Grapevine system from the street. We read the data plate on the outdoor unit and the furnace or air handler first.
The Census counts about 22,885 housing units in Grapevine.
The house’s age doesn’t tell you the system’s age. The data plate on the outdoor unit does, and it’s the first thing we read.
In an older Grapevine house, the AC was often added or upgraded long after the house was built, so ducts and equipment may not have been designed together. In townhomes and apartments, the air handler is usually in a closet and the condenser on a shared pad or roof, so access and clearances drive the job. In larger single-family homes, a second system for the upstairs is common. Each of those changes what a repair or replacement involves, and we explain it in the written price. Grapevine’s permit application lists the job address, the property owner and the contracting company, along with a description of the work, so the permit ties the job to your house and to the contractor responsible for it. The City’s fee schedule also provides for inspections outside normal business hours, which can matter when a replacement in the middle of summer can’t wait for the next weekday.
Grapevine permits for HVAC work
- When codes, ordinances or the building official require plans, they must be submitted with the application.
- Building Services: 200 S. Main Street, 817-410-3165 or 817-410-3166, Monday to Friday, 8 a.m. to 4:30 p.m.
- The City of Grapevine issues mechanical permits on its Mechanical, Electrical, Plumbing, Irrigation and Fuel Gas permit application, which includes a residential A/C change-out category.
- Contractors must register with the City of Grapevine to apply for permits. Registration is through the City’s OpenGov portal or the Building Services office, and the City has announced that starting November 1, 2026, all building contractors need to register for the 2027 permitting year.
Dallas Heating and Air Conditioning is registered with the City of Grapevine as a mechanical contractor. For a replacement, we pull the permit and schedule the inspection.
Grapevine registers contractors by permitting year, and the City says all building contractors need to register for 2027 starting November 1, 2026. Ask any contractor whether their registration is current before you sign.
Refrigerant and efficiency rules that affect your decision
R-22. The EPA ended the manufacture of new R-22 equipment in 2010 and the production and import of R-22 itself on January 1, 2020. An R-22 system can keep running, but it can only be recharged with recovered or reclaimed R-22. A large leak on an R-22 unit is often the point where replacement makes more sense than repair.
SEER2. Since January 1, 2023, Department of Energy rules require new split-system central air conditioners installed in the Southeast region, which includes Texas, to meet at least 14.3 SEER2 under 45,000 Btu/h and 13.8 SEER2 at 45,000 Btu/h and up. New split heat pumps nationwide must meet 14.3 SEER2. See SEER vs. SEER2.
New refrigerants. Under the EPA’s AIM Act rules, new home air conditioners and heat pumps are moving to refrigerants with lower global warming potential, such as R-454B and R-32. Read what the R-410A phase-out means.
How a Grapevine installation works
- Home visit. We check the equipment, ducts, electrical, attic access and the refrigerant type on the data plate.
- Sizing. We size the system for the house, its insulation, windows and ducts, not by copying the old label.
- Written options. Upfront written pricing for each option before any work starts. Financing available.
- Permit. We pull the Grapevine permit.
- Installation. Outdoor unit, matched coil or air handler, refrigerant lines, drains, electrical and thermostat as needed.
- Startup and inspection. We charge and test the system, then the City inspects it.
When it makes sense to replace
- The house never gets comfortable even after repairs
- You’re adding or remodeling space and the old system can’t keep up
- Your current system has failed and repair isn’t worth it
- An R-22 system has a large leak
Upfront written pricing before any work starts
Every replacement starts with a written proposal. Here’s what goes in it:
- Each equipment option is priced on its own.
- Financing available.
- What the written proposal covers: the equipment, matched indoor coil or air handler, refrigerant lines, drain, electrical connections, thermostat, permit and inspection.
- Any duct, attic access or electrical work the City will check is listed separately.
Why homeowners call us
- Upfront written pricing before any work starts
- Financing available
- Registered with the City of Grapevine as a mechanical contractor
- All major brands, including Carrier, Trane, Lennox, Rheem, American Standard, York, Daikin, Mitsubishi, Fujitsu, Amana, Bryant and Goodman
- NATE-certified technicians
- 24/7 service
More for Grapevine: HVAC service in Grapevine, AC repair in Grapevine, heating repair in Grapevine. See also AC installation and replacement and HVAC maintenance and tune-ups.
Also nearby: AC installation in Flower Mound, AC installation in Irving.
Call 972-423-0012, open 24 hours.
